Copying
>
Available Copying Methods
1. Place all originals face up in the ADF.
Important:
c
If you want to copy originals that are not supported by the ADF, use the scanner glass.
"Originals that are not Supported by the ADF" on page 36
Note:
You can also place the originals on the scanner glass.
"Placing Originals" on page 35
2. Select Copy on the home screen.
3. Select the Basic Settings tab, select 2-Sided, and then select 2→2-Sided or 1→2-Sided
4. Specify other settings such as the original orientation and the binding position.
5. Tap
x
.
Copying by Enlarging or Reducing
You can copy originals at a specified magnification.
1. Place the originals.
"Placing Originals" on page 35
2. Select Copy on the home screen.
3. Select the Basic Settings tab, and then select Reduce/Enlarge.
4. Specify the amount of enlargement or reduction.
5. Tap
x
.
>
Copying by Enlarging or Reducing
83