Brother MFC4820C Service Manual page 82

(5) Each color has its own correct position. Insert the new ink cartridge into its carriage by
pressing until it clicks.
New ink cartridge
(6) After installing the ink cartridges, close the ink cartridge cover, output paper support and
scanner cover.
(7) If you replaced an ink cartridge while "NEAR EMPTY XXXX" was displayed on the LCD,
the LCD will ask you to verify that it was a brand new one. Example: "DID YOU CHANGE
BLCK? 1.YES 2.NO." For each new cartridge you installed, press 1 on the dial pad to
automatically reset the ink dot counter for that color. If the ink cartridge you installed is not a
brand new one, please be sure to select 2.
NOTE: If you wait until the "INK EMPTY XXXX" message is displayed on the LCD, the
machine will automatically reset the ink dot counter.
CAUTION: If ink gets in your eyes, irrigate them with water immediately and call a doctor if
you are concerned.
Insert until it clicks
5 -5