Disassembly Of The Set - Sharp VL-MC500U Service Manual

VL-MC500U/K

4. DISASSEMBLY OF THE SET

Note:
Before removing the cabinet, turn off the power supply, and ascertain that the battery have been removed.
1.
(c)
Battery Unit
1) Detach the battery unit.
2) Remove the three screws ((d)XiPSN17P03000).
3) Remove the one screw ((c)LX-HZ0050TAFN).
4) Detach the LCD cabinet in the direction of the arrow.
2.
Speaker Wire Connect
1) Remove the two screws ((d)XiPSN17P03000).
2) Disconnect the speaker wire connector.
3) Detach the side cover in the direction of the arrow.
(d)
(d)
(d)
(d)
3.
FPC
(d)
1) Remove the FPC of the LCD panel, and detach the LCD panel
in the direction of the arrow.
4.
(d)
Main PWB
Inverter PWB
FPC
(d)
1) Remove the four screws ((d)XiPSN17P03000), the tilt FPC
and the tilt wire connector to detach the lens section.
2) Remove the two screws ((d)XiPSN17P03000) to detach the
main PWB.
3) Remove the one screw ((d)XiPSN17P03000) and the FPC to
detach the inverter PWB.
8
LCD Panel
(d)
(d)
Tillt FPC
(d)
connector
(d)
(d)