Specifications - Inter-m CA-6220 Operating Manual

Interm stereo powered mixer operating manual
Table of Contents

Advertisement

STEREO POWERED MIXER

Specifications

..........................................................
Specifications
- ELECTRICAL
Maximum Output Power
(0.5% THD at 1kHz)
T.H.D
(20Hz~20kHz)
Frequency Response
Hum and Noise
(Average, Rs=150Ω)
(w/BPF 20Hz~20kHz)
Maximum Voltage Gain
Crosstalk (at 1kHz)
Input Channel Gain Control
Input Channel Equalization
Graphic Equalizer
Level Meters
Channel Peak Indicators
Phantom Power
Digital Effect
- GENERAL
Power Source
Power Consumption
Weight
Dimensions
22
CA-6220/8220
200W + 200W/4Ω, 150W + 150W/8Ω
Channel Input to LINE OUT: Less than 0.1%, 20Hz~20kHz, +4dB output
AMP IN to SPEAKER OUT:
Less than 0.1%, 20Hz~20kHz, 175W Output into 4Ω
+1, -3dB, 20Hz~20kHz, 1W into 4Ω
-128dB
Equivalent Input Noise
-96dB
Residual Output Noise (LINE Out)
-90dB
Residual Output Noise (Effect Send, Monitor Out)
-73dB
Residual Output Noise (Speaker Out)
-90dB
(LINE OUT)
Master fader at maximum level
-77dB
(EFFECT SEND)
Master fader at maximum level and all channel
EFFECT controls at minimum level.
-77dB
(MONITOR OUT)
Master VR at maximum level and all channel
MONITOR controls at minimum level.
64dB
MIC IN to LINE OUT, MON OUT
44dB
LINE IN to LINE OUT, MON OUT
70dB
MIC IN to SEND 1, 2
50dB
LINE IN to SEND 1, 2
0dB
RETURN 1, 2 to LINE OUT, MON OUT
12dB
TAPE IN to LINE OUT, MON OUT
70dB
Adjacent Input Channels
70dB
Input to Output
44dB Variable from -60dB to -16dB (MIC)
44dB Variable from -40dB to +4dB (LINE)
±15dB Maximum boost or cut in each band
HIGH: 12kHz shelving
MID: 2.5kHz peaking
LOW: 80Hz shelving
* Turnover/Roll off frequency of Shelving: 3dB below
maximum variable level
±12dB Maximum boost or cut in each of nine bands
: 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16kHz
10 Dot LED x 2
Red LED on each channel turns ON when LINE OUT signal reaches the level
3dB below clipping.
+48V is supplied to electrically balanced inputs to power condenser
microphones via 6.8kΩ current limiting/isolation resistors.
16 program selection
AC 110V – 240V, 50/60Hz
AC 120V: 310W, AC 230V–240V: 890W
20kg
440(W) x 222(H) x 258(D) mm
0dB=0.775Vrms

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ca-8220

Table of Contents