Specifications - Inter-m MX-1243 Operation Manual

UDIO MIXER

Specifications........................................................................

Specifications
Maximum Output Level
Input Sensitivity & Impedance
THD
Frequency Response
EQ Characteristics
Hum & Noise
( verage, Rs=150 )
(Measured with DIN udio)
Crosstalk
Maximum Voltage Gain
Gain djustment
LED Meter
CH. Peak Indicators
Operating temperature
Phantom voltage
Power Source
Power Consumption
Dimensions
Weight
* Design and specification are subject to be changed for the improvement of product quality without pre notice.
10
MX-1243
+24dB @ 600 , 0.5% THD at 1kHz (B L) Main Out L/R
+24dB @ 600 , 0.5% THD at 1kHz (B L) Mono Out
+20dB @ 600 , 0.5% THD at 1kHz (UNB L) UX Send 1-4
100mW @ 40 , 0.5% THD at 1kHz Headphone
-60dB @ 600 (B L) Mic (CH1-CH12)
-20dB @ 10k (B L) Line (CH1-CH12)
+4dB @ 10k (UNB L) UX Return
0.1% @ +14dB, 20-20kHz
(M IN OUT L/R @ 600 , MONO OUT @ 600 , UX SEND @ 600 )
+1dB/-2dB, 20-20kHz @ +4dB
(M IN OUT L/R @ 600 , MONO OUT @ 600 , UX SEND @600 )
±12dB 12kHz Shelving (Max ±15dB) High
±12dB 2.5kHz Peaking Mid
±12dB 80Hz Shelving (Max ±15dB) Low
-127dB Equivalent Input Noise
-95dB Residual Noise
(M IN OUT L/R @ 600 , MONO OUT @ 600 , UX SEND @ 600 )
-76dB Main Out L/R, Mono Out
(INPUT VR & F DER MIN/OUTPUT F DER M X)
-68dB UX Send 1-4 (INPUT VR & F DER MIN/OUTPUT VR & F DER M X)
-70dB djacent Input Channels
-70dB Input to Output
84dB Mic to Main Out L/R, Mono Out
76dB Mic to UX Send
44dB Line to Main Out L/R, Mono Out
36dB Line to UX Send
20dB UX Return to Main Out L/R, Mono Out
44dB Mic In/Line In
"0" +4dB Output Level
Red LED on each channel lights when pre-EQ or post-fader signal reaches 3dB below clip level.
-10˚C ~ +40˚C
DC +48V
C 100-120V or C 220-240V, 50/60Hz
(Supplied C mains transformer depends on country requirements)
25W
7.5kg
482(W)×104(H)×310(D)mm
0dB=0.775Vrms
MX-1243