Samsung AM009FN1DCH/AA Service Manual page 98

Troubleshooting
■ The procedure of setting option
1. Setting SEG2, SEG3 option
Press Low Fan button( ) to enter SEG2 value.
Press High Fan button( ) to enter SEG3 value.
Each time you press the button,
2. Setting Cool mode
Press Mode button to be changed to Cool mode in the ON status.
3. Setting SEG4, SEG5 option
Press Low Fan button( ) to enter SEG4 value.
Press High Fan button( ) to enter SEG5 value.
Each time you press the button,
4. Setting Dry mode
Press Mode button to be changed to DRY mode in the ON status.
5. Setting SEG6, SEG8 option
Press Low Fan button( ) to enter SEG6 value.
Press High Fan button( ) to enter SEG8 value.
Each time you press the button,
6. Setting Fan mode
Press Mode button to be changed to FAN mode in the ON status.
7. Setting SEG9, SEG10 option
Press Low Fan button( ) to enter SEG9 value.
Press High Fan button( ) to enter SEG10 value.
Each time you press the button,
8. Setting Heat mode
Press Mode button to be changed to HEAT mode in the ON status.
9. Setting SEG11, SEG12 option
Press Low Fan button( ) to enter SEG11 value.
Press High Fan button( ) to enter SEG12 value.
Each time you press the button,
10. Setting Auto mode
Press Mode button to be changed to AUTO mode in the OFF status.
4-8
Option setting
... will be selected in rotation.
... will be selected in rotation.
... will be selected in rotation.
... will be selected in rotation.
... will be selected in rotation.
Status
SEG2 SEG3
SEG4 SEG5
SEG6 SEG8
SEG9 SEG10
SEG11 SEG12
Samsung Electronics