Install the drive in the carrier.
5.
Install the drive.
6.
CAUTION:
all bays are populated with either a component or a blank.
Connect the power cord to the server.
7.
Connect the power cord to the power source.
8.
Power up the server (on page 14).
9.
To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website
(http://www.hp.com/go/smartstorage/docs).
Installing a hot-plug drive
CAUTION:
all bays are populated with either a component or a blank.
To install the component:
To prevent improper cooling and thermal damage, do not operate the server unless
To prevent improper cooling and thermal damage, do not operate the server unless
Hardware options installation 36