Install The Pci Riser Cage - HP ProLiant DL320e Gen8 v2 User Manual

Lift the PCI riser cage to unseat the PCI riser board.
6.

Install the PCI riser cage

CAUTION:
disconnect all power cords before removing or installing the PCI riser cage.
Use the guide pins on the system board and on the rear panel to align the PCI riser cage, and then press
1.
the PCI riser cage down.
Install the access panel (on page 17).
2.
Do one of the following:
3.
Slide the server into the rack.
o
Install the server into the rack
o
To prevent damage to the server or expansion boards, power down the server, and
("Installing the server into the rack" on page 26).
Operations 20