Install the cache module on the storage controller.
8.
Install the storage controller
9.
Install the PCI riser cage (on page 20).
10.
Use the chassis cable clip to secure the excess length of the capacitor pack cable.
11.
Install the access panel (on page 17).
12.
Do one of the following:
13.
Slide the server into the rack.
o
Install the server into the rack
o
Connect the peripheral devices to the server.
14.
Connect the power cord to the server.
15.
Connect the power cord to the power source.
16.
Power up the server (on page 14).
17.
("Installing a storage
controller" on page 38).
("Installing the server into the
rack" on page 26).
Hardware options installation 41