Yamaha MOTIF XF Reference Manual page 23

Effect connection in each mode
In the Voice mode
Voice
Element or Drum Key
Element EQ
Element 1 – 8
Drum Key C0 – C6
AD Part (set in the Utility mode)
Sets the Element EQ parameters applied to
each Element (for a Normal Voice) and each
key (for a Drum Voice).
The Element EQ parameters can be set in the EQ
display (pages 83 and 90) of the Voice Edit mode.
Determines which Insertion Effect, A or B, is
applied to each Element (or to each key when a
Drum Voice is selected).
The Insertion Effect can also be bypassed. This can be
set in the Connect display (page 64) of the Voice
Common Edit or the Oscillator display (page 69) of the
Voice Element Edit (or Key Edit).
n These two display types are linked and feature the same
settings, only in different formats.
Determines the Insertion A/B connection from
the following four types: parallel, A F B, B F A,
and Vocoder.
This block also selects the Effect Types of Insertion A
and B respectively and sets the related parameters.
In the Performance mode
Performance
Part
Voice
Part EQ
Insertion A/B
Part 1 – 4
AD Part
Insertion A
Insertion B
Send Level
Chorus
Send
Level
Reverb
Chorus To
Reverb
Chorus
Master Effect
Return Level
Reverb
Chorus To
Reverb
These can be set in the Connect display (page 64) and
the Insertion A/B display (page 66) of Voice Common
Edit.
Determines the Send Level/Return Level to/
from the Reverb/Chorus and the signal level
sent from the Chorus to the Reverb.
This block also selects the Effect Types of Reverb and
Chorus respectively and sets the related parameters.
These can be set in the Connect display (page 64) and
the Reverb display/Chorus display (page 66) of Voice
Common Edit.
Selects the Master Effect type and sets the
Effect parameters in the Master Effect display
(page 224) of the Utility mode.
Sets the Master EQ parameters in the Master
EQ display (page 224) of the Utility mode.
Master Effect
Return
Level
Effect Block
Master EQ
Master EQ
MOTIF XF Reference Manual
23