Yamaha MOTIF XF Reference Manual page 109

Part Edit parameters
In the Performance Part Edit mode, you can edit the parameters of the individual Parts such as Voice, Arpeggio, EG and EQ
settings.
About the asterisk (*) marks
For users who are new to editing and may be confused by the large amount of parameters, the most basic and easy-to-understand
parameters are conveniently marked with asterisks in this section. If you are just starting out with editing Performance Parts, try these
parameters first.
Selected Part display/Four-Part display
In the Performance Part Edit mode, you can use two types
of display. One type of display lets you edit parameters for
the currently selected Part and the other type of display
lets you view parameters for four Parts. You can switch
between these two types by pressing the [SF5] button.
Note that the display for four Parts is not available for the
[F2] ARP Main and the [F3] ARP Other displays.
The display for the currently selected Part
The display for all four Parts of the current Performance
Selecting a Part to be edited
After pressing the [PERFORMANCE CONTROL] or
[TRACK] button so that its lamp lights, press one of the [1]
– [4] buttons to select a Part to be edited.
Selecting a Part
n For details about useful functions such as Mute/Solo and Jobs,
see pages 101 and 117.
[PERFORM]  Performance selection  [EDIT]  Part selection
Setting the Wave and Note range of
the Part—[F1] Voice
Voice Settings for each Part—[SF1] Voice
Part Switch*
Determines whether the currently edited Part is on or off.
When this is set to off, the currently edited Element will not
sound.
Settings: off (inactive), on (active)
Bank*
Number*
Determines the Voice assigned to the current Part by
specifying the Voice Bank and Number.
n You can call up the list and select the desired item by pressing
the [SF6] LIST button. For details, see page 37.
Param. with Voice (Parameter with Voice)
Determines whether or not the following parameter settings
of the selected Voice are copied from the Voice to the
current Part when you change a Voice for the current Part
individually.
• Arpeggio settings
• Filter Cutoff Frequency
• Filter Resonance
• Amplitude EG
• Filter EG
• Pitch Bend Range (Upper/Lower)
• Note Shift
n Regardless of the Parameter with Voice setting ( ), the
settings of Mono/Poly ( ), Portamento Part Switch ( ),
Portamento Time ( ) and Portamento Mode ( ) are not
Editing a Performance
MOTIF XF Reference Manual
109