Yamaha MOTIF XF Reference Manual page 131

Source Key Bank
Destination Key Bank
The source Key Bank is set by using the [SF5] Keybank
button or [SF6] KBD button to select the key in the
waveform after selecting the Waveform number (001 –
128). The source Key Bank is set by moving the cursor to
the Key value and using the Data dial or [SF6] KBD button
to select the desired key after selecting the Waveform
number (001 – 128). The Velocity range values of the
destination Key Bank are automatically set to the same as
those of the source Key Bank.
n You can hear the sample assigned to the source Key Bank by
pressing the [SF1] Audition button.
02: Delete
This Job deletes the specified Key Bank and its Sample.
By deleting unnecessary Samples, you can increase the
available memory space.
Key Bank to be deleted
Determines the Key Bank to be deleted by setting the
Waveform number (001 – 128). The Key range and Velocity
range of the Key Bank to which the selected Waveform is
assigned are automatically shown below the Waveform
number.
03: Move
This Job moves a specified Key Bank to another
Waveform. Also the Sample assigned to the Key Bank is
moved.
Creating a Voice/Performance by Using the Sampling Function
Source Key Bank
Destination Key Bank
Determines the Key Banks of source and destination
respectively by setting the Waveform number (001 – 128).
Setting the source Waveform number calls up one of the
Key Banks (the Key range and Velocity range) which can
be changed by pressing the [SF5] Keybank button and
[SF6] KBD button. The Key range and Velocity range of the
destination Key Bank are automatically set to the same
values as those of the source Key Bank.
n You can hear the sample assigned to the source Key Bank by
pressing the [SF1] Audition button.
04: Normalize
This Job maximizes (normalizes) the overall level of the
specified Sample. This is useful for bringing up the volume
of a Sample that was inadvertently recorded at a low level.
Key Bank
Determines the Key Bank to which the desired Sample is
assigned by specifying the Waveform number (001 – 128).
The Key range and Velocity range of the Key Bank to which
the selected Waveform is assigned are automatically
shown below the Waveform number.
Ratio
Determines the post-normalization Sample level. A setting
of 100% maximizes the level so that the highest peak level
in the Sample is just below clipping (maximum digital
signal level). Settings higher than 100% will raise the
Sample level above the maximum, producing deliberate
clipping. Normally, set this to 100% or less.
Settings: 1% – 800%
MOTIF XF Reference Manual
131