Sf4] Tuning - Yamaha MOTIF XF Reference Manual

Arpeggio Settings—[SF3] Arpeggio
From this display you can set parameters related to output
of the Arpeggio MIDI data in the Voice mode. The settings
here affect all Voices. This display is available only when
entering the Utility mode from the Voice mode.
ARP MIDI Out Switch
When this is set to on, Arpeggio playback data is output
from the MIDI terminal.
Settings: on, off
ARP Transmit Ch (Arpeggio Transmit Channel)
Determines the MIDI transmit channel through which
Arpeggio playback data will be sent (when the Switch
parameter above is set to on).
Settings: 1 – 16
Creating your original Micro Tuning—

[SF4] Tuning

From this display, you can create your original Micro Tuning
in the User Bank. You can copy a Micro Tuning to another
number, then create new one based on it. This display is
available only when entering the Utility mode from the Voice
mode.
Micro Tuning No.
Determines the destination to which the created Micro
Tuning setting is stored.
Settings: 1 – 8
Micro Tuning Name
Enters the desired name for the Micro Tuning. For detailed
instructions on naming, see page 37.
Tuning Offset
Lets you tune the individual notes of the keyboard in cents
to create your original Micro Tuning.
Settings: -99 – +0 – +99 cents
[SF5] Copy
From this display called up via this button, you can copy a
Micro Tuning to another number then create a new Micro
Tuning based on it.
Micro Tuning Copy Procedure
1
Select a Micro Tuning number as source.
2
Press the [SF5] button to call up the Copy display.
3
Select a Micro Tuning number as destination.
4
Press the [ENTER] button to execute the Copy
operation.
System Settings (Utility mode, etc.)
MOTIF XF Reference Manual
225