Brother MFC-9420CN Service Manual page 391

Selector
No.
Interval setting of engine calibration
execution
1 (The 'engine calibration' is that the
|
engine controls measuring the toner
4
adhering amount periodically
according to the number of the
printed pages or time.)
Idling mode setting when recording
5
the fax message
6
|
8
•
Selectors 5: Idling mode setting when recording the fax message
The idling mode is to print the fax message by reducing the recording speed (spacing) in order to prevent
waste recording when a paper length error is occurred while recording the fax message.
When the idling mode is turned on, the recording speed is approximately half. (monochrome: 16ppm, color:
6.5ppm)
Selector
No.
1
|
Not used.
8
WSW53 (Function setting 17)
Function
Not used.
WSW54-60
Function
App. 4-54
Setting and Specifications
No.1234
0001: 100, 200, 300, 300
0010: 100, 200, 200, 200
0011: 100, 100, 100, 100
0100: 50, 200, 300, 300
0101: 50, 200, 200, 200
0110: 50, 100, 300, 300
0111: 50, 100, 200, 200
1000: 30, 60, 150, 250,
1001: 30, 60, 100, 200
1010: 30, 60, 100, 100
1011: 30, 60, 60, 200
1100: 30, 60, 60, 100
1101: 50, 50, 50, 50
1110: The engine calibration is disabled.
1111:
All calibrations (engine and software) are
disabled.
0: OFF
Setting and Specifications
1: ON
Confidential