2 ] Life Period Set (Code 44) - Brother MFC-9420CN Service Manual

[ 2 ] Life Period Set (Code 44)

Function
This function is to set the life counter of the periodical replacement parts.
Operating Procedure
(1) Select Life Period Set with using the 4 or 5 key in the initial stage of the factory mode.
After selecting, press the 6 key.
The "44 LIFE PERIOD / ▲ 2 3 4 5 6 7 8 9 A B C D E F G" appears on the LCD.
(2) Select the periodical replacement part to be set with using the 4 or 5 key.
After selecting, press the 6 key.
7: Belt cartridge (BC)
8: Fusing unit (FU)
9: Transfer belt (TB)
A: 120K KIT (OW)
D: Pick-up roller (PK) (Machine)
E: Pick-up roller (PL) (LFU)
If selecting other figure than the above ones and pressing the 6 key, it is invalid, and the
display is not changed.
Enter the value onto the blinking digit.
Move the cursor onto the digit to be entered with using the 4 or 5 key.
Enter the value with using the 6 key.
After entering the set value, move the cursor onto SET with using the 4 or 5 key and
press the 6 key to register the set value.
<Example of LCD indication>
" PERIOD 120K KIT / 1 2 0 0 0 0 P
(3) Press the 3 key so that the display is returned to the message described in Step (1).
(4) Press the 3 key again, and the machine returns to the initial stage of the factory mode.
SET "
8 -4 0 Confidential