[Wide Mode]; [Sxga Mode]; [P-Timer] - Panasonic PT-VZ570 Operating Instructions Manual

f The items will switch each time you press the button.
[BLUE]
[BLACK]
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO]
Note
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.
f If you do not register the image of the [USER LOGO], the projected image will be displayed in black even if the [BACK
COLOR] is set to [USER LOGO].

[WIDE MODE]

Using this function when displays the incorrect signals input.
1) Press as to select [WIDE MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[ON]
[OFF]

[SXGA MODE]

This function is used if the whole projected image is not displayed when SXGA signal is input.
1) Press as to select [SXGA MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[SXGA]
[SXGA +]

[P-TIMER]

Set and operate the presentation timer function.
Setting the mode
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[COUNT UP]
[COUNT DOWN]
Setting the countdown timer
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [TIMER].
4) Press qw to set the time.
f The time can be set in 1-minute increments from 1 to 180 minutes.
f The factory default value is 10 minutes.
68 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
Displays the entire projection area in blue.
Displays the entire projection area in black.
Displays the image registered by the user.
Displays by judging the signal automatically. Set to this mode normally.
When input the wide signal.
When input the 4:3 signal.
Displays by judging the signal automatically. Set to this mode normally.
Switch the item to [SXGA] or [SXGA+] manually if the whole projected image is not displayed
when SXGA signal is input.
Displays the elapsed time since the count was started.
Displays the remaining time of the time set by [TIMER].