Table of Contents
Advertisement
f The items will switch each time you press the button.
[BLUE]
Displays the entire projection area in blue.
[BLACK]
Displays the entire projection area in black.
[DEFAULT LOGO]
Displays the Panasonic logo.
[USER LOGO]
Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.
[WIDE MODE]
Using this function when the image is displayed incorrectly for the input signals.
1)
Press as to select [WIDE MODE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[ON]
[OFF]
[SXGA MODE]
This function is used if the whole projected image is not displayed when the resolution 1 280 x 1 024 dots of the
SXGA signal is input.
1)
Press as to select [SXGA MODE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[1280x1024]
[1400x1050]
[P-TIMER]
Set and operate the presentation timer function.
Setting the mode
1)
Press as to select [P-TIMER].
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3)
Press as to select [MODE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[COUNT UP]
[COUNT DOWN]
Setting the countdown timer
1)
Press as to select [P-TIMER].
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3)
Press as to select [TIMER].
84 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays by judging the signal automatically. Set to this mode normally.
When input the wide signal.
When input the 4:3 signal.
Displays by judging the signal automatically. Set to this mode normally.
Switches the item to [1280x1024] or [1400x1050] manually if the whole projected image is not displayed when
SXGA signal is input.
Displays the elapsed time since the count was started.
Displays the remaining time of the time set by [TIMER].
Advertisement
Table of Contents
