Cadillac 1967 VVI Data Book page 161

ingly. Move the rear switch lever to raise or lower the rear of
the seat and to tilt the seat-back accordingly.
Additional seat adjustments
Additional rearward seat positioning can be made on all bench
type seats by having your Authorized Cadillac Dealer re-
position the seat one inch rearward at the attachment to
the floor.
If you desire, the two-way electrically operated seat may be
lowered by having your dealer remove the shims between
seat supports and the floor.
Coupe seat-back lock
The forward folding front seat-backs on all coupe styles
incorporate an automatic lock as an additional safety feature
to prevent them from tilting forward in cases of sudden stops.
An individual release button is located on the upper portion
of the seat side panel. To fold the seat forward, depress the
button to unlock the seat-back. The seat-back locks into place
automatically when in the upright position.
Bucket seat controls
On cars equipped with bucket seats, two-way electrical
controls are provided for fore and aft movement of each seat.
The controls are located on the lower outboard side of the
seat cushion panels.
Four-way movement of the driver's seat only is optional at
extra cost on all cars with bucket seats.
Reclining bucket seat and head restraints
A reclining feature for the front passenger's seat, including an
adjustable head restraint for both the driver and passenger
seats is optional at extra cost on models with bucket seats.
Head restraints only are also available as an extra cost option
on all models.
The reclining feature provides manual adjustment of the
seat-back so that it can be tilted to a 30° reclining position.
The release lever is located on the right side of the seat cushion.
To tilt the seat-back, lift the release lever and push the seat-
back rearward to the desired position. Release the lever to
lock the seat in place. To raise the seat-back, lift the release
lever and lean forward to allow the assist spring to move the
33