Table of Contents
Advertisement
Wireless transmission of the speed
The VDO M2 WL comes with analogue wireless transmission.
The wireless range is approx. 75 cm between the transmitter
on the fork and the computer/receiver on the handlebars.
During attachment, make sure you attach the transmitter to
the left-hand fork leg if you attach the computer to the stem
or on the left of the handlebar.
If you attach the computer to the right of the handlebars, you
can also attach the transmitter to the right-hand fork leg.
Attaching the handlebar bracket
You can attach the computer to the right or left of the handle-
bars or in the centre on the stem. Attach the handlebar
bracket in the corresponding position.
STEP 1
Decide whether you want to attach the computer
to the handlebars or the stem.
STEP 2
Rotate the foot of the handlebar bracket by 90° accordingly.
To do so, undo the screws in the bracket, remove the foot
and rotate it 90° then insert and tighten the screws again.
Attention:
do not overtighten the screws.
STEP 3
Guide the cable ties through the slot in the handlebar bracket,
place around the handlebars or the stem and pull (do not pull
tight just yet).
STEP 4
For handlebar attachment: align the computer angle
to achieve optimum readability. Now pull the cable ties tight.
Use clippers to snip off protruding ends.
Note:
LED front lights can interfere with analogue wireless
transmission.
1
–
3
4
90°
1
–
3
4
M2 WL
2
6
Hide quick links:
Advertisement
Table of Contents
