Test Run Method - LG AMNH076LQL0 Service Manual

Test run method

1. Set the wiring of system and indoor unit.
2. Apply power to the setting.
3. Do auto addressing to the outdoor unit.
4. After addressing, initialize the central controller(Manual initialize: Total on + total off + 16 key).
• Cooling: Setting basically(Total On + Total Off + 4 key)
• Heating: Total On + Total Off + 8 key
6. Check up On/Off with a related indoor key pressing.
Installation
CAUTIONS
Do not install in this area
• Don't install near elevator, computer, auto-
matic door. (High noise area).
• Don't install near high moisture & high oscilla-
tion area.
• Don't install near direct sunlight or heat
source.
Red power lamp 'On'
Keep in mind
• Don't operate with wet hands.
• Don't pull the connected wire.
Control Devices and Function
Service Manual 111