LG AMNH076LQL0 Service Manual page 65

CAUTION: If a power plug is not to be used, provide a circuit breaker between
power source and the unit as shown below.
Main power source
The power cord connected to the outdoor unit
should be complied with the following specifica-
tions (Rubber insulation, type H05RN-F
approved by HAR or SAA).
Air
Conditioner
NORMAL CROSS
SECTIONAL AREA
3.5mm (18k~30k Btu)
2
5.0mm (31k~56k Btu)
2
Circuit Breaker
Use a 30A circuit
breaker or time
delay fuse.
CAUTION
The connecting cable connected to the indoor
and outdoor unit should be complied with the
following specifications (Rubber insulation, type
H07RN-F approved by HAR or SAA).
Installation
NORMAL CROSS-
SECTIONAL AREA
0.75mm
2
Service Manual 65