Lexmark X950 Series User Manual page 64

After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.
Note: Make sure the serial parameters in the COM port match the serial parameters you set in the printer.
a
Open the Device Manager.
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type devmgmt.msc.
3
Press Enter, or click OK.
b
Look for Ports, and then click + to expand the list of available ports.
c
Right-click the COM port where you attached the serial cable to your computer (example: COM1).
d
Click Properties.
e
On the Port Settings tab, set the serial parameters to the same serial parameters in the printer.
Check the serial heading of the menu settings page for the printer settings.
f
Click OK, and then close all the windows.
g
Print a test page to verify printer installation.
Additional printer setup
64