Lexmark X950 Series User Manual page 217

Hole Punch
Off
On
Hole Punch Mode
2 holes
3 holes
4 holes
Duplex Binding
Long Edge
Short Edge
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver
Off
2-Up
3-Up
4-Up
6-Up
9-Up
12-Up
16-Up
Paper Saver Border
None
Solid
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specifies whether prints have punched holes
Notes:
•
Off is the factory default setting.
• This menu appears only when a puncher is installed.
Determines the type of punch finishing performed on prints
Notes:
•
"3 holes" is the factory default setting if 3-hole puncher is installed.
•
"4 holes" is the factory default setting if 2-hole and 4-hole puncher is installed.
•
This menu appears only when a puncher is installed.
Defines the way duplexed pages are bound and how the printing on the back of the page is
oriented in relation to the printing on the front of the page
Notes:
• Long edge assumes binding along the long edge of the page (left edge for portrait and top
edge for landscape).
•
Short edge assumes binding along the short edge of the page (top edge for portrait and left
edge for landscape).
Specifies the orientation of a multiple-page document
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Specifies that multiple-page images be printed on one side of a paper
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Prints a border on each page image
Note: None is the factory default setting.
Specifies the positioning of multiple-page images
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they are in portrait or
landscape orientation.
Understanding printer menus
217