Operational Safety Guidelines - Motorola IMPRES User Manual

Adaptive mult-unit charger
Hide thumbs Also See for IMPRES:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 192

OPERATIONAL SAFETY GUIDELINES

• Turn the radio off when charging the battery.
• This equipment is not suitable for outdoor use. Use only in dry
locations/conditions.
• Connect equipment only to an appropriately fused and wired supply
of the correct voltage (as specified on the product).
• Disconnect from line voltage by removing the mains plug from the outlet.
• The socket outlet to which this equipment is connected should be
close and easily accessible.
• For equipment using fuses, replacements must comply with the type
and rating specified in the equipment instructions.
• Maximum ambient temperature around the charger must not exceed
40°C (104°F).
• Make sure the cord is located where it will not be stepped on, tripped
over, or subjected to water, damage, or stress.
• This unit utilizes the same wall mount unit as the NTN4796 Multi Unit
Charger. The wall mount part number is NLN7967.
• For fuse replacement, use only fuses of the same type and rating
listed on the charger label. The following parts can be ordered from
your local Parts / Aftermarket facility:
Fuse
Holder
Cover
6571489S01
0987626G01
0987739G01
3

Advertisement

Table of Contents
loading

Table of Contents