Package Contents - Ubiquiti Airmax NBE-M2-400 Quick Start Manual

Introduction
Thank you for purchasing the Ubiquiti Networks
This Quick Start Guide is designed to guide you through
the installation, and show you how to access the airOS®
Configuration Interface. This Quick Start Guide also includes the
warranty terms and is for use with the NanoBeamM2, model
NBE-M2-400, and the NanoBeamM5, model NBE-M5-400.
If you want to add a radome to enclose the Dish Reflector,
Ubiquiti Networks offers the NanoBeam Radome, 400 mm,
model NBE-RAD-400 as an optional accessory. Product details are
available on our website at www.ubnt.com/airmax

Package Contents

Dish Reflector
Rear Housing
Flange Nuts
(M8, Qty. 2)
* The NBE-M5-400 Antenna Feed has a thin gray ring around the center of
the cap to differentiate it from the NBE-M5-300 Antenna Feed.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
is designed for outdoor installations. It is the customer's responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.
NBE-M2-400
Antenna Feed
Dish Bracket
PoE Adapter
(24V, 0.5A)
™
or
Pole Clamp
Power Cord
NanoBeam
.
™
NBE-M5-400
Antenna Feed
*
U-Bolt
High-Performance
airMAX ® Bridge
Models:
NBE-M2-400, NBE-M5-400
Quick Start Guide
™