Basic Operation; Projecting Image - JVC LCT2440-001B Instructions Manual

Projecting Image

This section describes the basic operations to project input images on the screen.
20

Basic Operation

Preparation
Remove the lens cap.
A
B
C
D
Insert the power plug to the power outlet
A Connect to this unit
B Connect to the power outlet
A
Power Cord
(Supplied)
Turn on the power
You can also press the [STANDBY/ON] button on the unit to turn on the
power. (pP11)
Project the image
Select input mode
You can also select the input mode by pressing the [INPUT] button on
the unit. (pP11)
Play back the selected device
Adjust the position of the projection screen
See Installing the Projector and Screen for procedures on adjusting the
position. (pP18)
Light on (Red)
B
Light on (Green)