JVC LCT2440-001B Instructions Manual page 28

Setting Menu (Continued)
Video>HDMI
Q
HDMI
Configures the input signals of the HDMI input terminal.
Auto
YCbCr(4:4:4)
YCbCr(4:2:2)
RGB
This setting is available only when projecting the HDMI input.
Video>Aspect
R
Aspect
Configures the screen size (aspect ratio) of the projected image.
4:3
16:9
Zoom
When high definition images are input, the screen size is fixed at 16:9 .
This setting can also be configured from the remote control. (pP12, 22)
Video>Film Mode
S
Film Mode
Select this to view movies shot on film.
Auto
Off
Video>Color System
T
Color System
Configures the colour system.
Auto
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM
This setting is available only when projecting the video or S-video input.
Video>Black Level
U
Black Level
Configures the black level.
0 %
7.5 %
This setting can only be adjusted when NTSC signals are input to the video or S-video input terminal.
28
Settings
Automatically configures input signals.
Select this when Y Cb Cr (4:4:4) video signals are input.
Select this when Y Cb Cr (4:2:2) video signals are input.
Select this when RGB video signals are input.
Sets screen size of the projected image to 4:3.
Sets screen size of the projected image to 16:9.
Zooms the image.
For normal circumstances, select this setting.
Select this when you are not watching movies shot on film.
Configures the colour system automatically.
Select this when the colour system is NTSC.
Select this when the colour system is NTSC4.43.
Select this when the colour system is PAL.
Select this when the colour system is PAL-M.
Select this when the colour system is PAL-N.
Select this when the colour system is SECAM.
Select this when the gradation of the dark portions of an image is indistinct with the
7.5 % setting.
Select this when the dark portions of an image appear washed out with the 0 % setting.