Table of Contents
Advertisement
Pioneer DV-505
Step 3 -
Remove the four screws holding the PCB in place
and turn the PCB over being careful to make sure
none of the ribbon cables are fowled.
Please Note
The PCB cannot be removed from the player easily. It is
perfectly possible to do the modification within the freedom
of movement allowed by the ribbon cables connecting the
Video/Logic PCB to the rest of the machine.
Once you have unscrewed the PCB, it should be fairly easy to
flip it over. Because most of the ribbon cables connect down
the left hand side of the board as it is situated in the player, it
is easiest to flip it such that it is sitting over the disc tray
assembly.
If you are perching the PCB over the disc tray assembly
it may be a good idea to insert a piece of paper under
the PCB to guard against solder splashes getting on the
disc tray assembly.
The underside of this part of the PCB is
where the modification needs to be
performed.
Page 12
Code Switchable Modification
Hide quick links:
Advertisement
Table of Contents
