Performing The Modification; Opening The Player - Pioneer DV-505 Instruction And Installation Manual

Pioneer DV-505 Code Switchable Modification
Chapter 3

Performing The Modification

Please Note
Disconnect the mains power before opening the unit.
You will need a mid-size Philips screwdriver, a thin-tipped
soldering iron (25 watt max) suitable for electronic work,
and a length of self-fluxing solder.
You should have some experience of using a soldering
iron for electronic work. If you don't have such experience
you would be well advised to seek helo from someone who
does.
You will be invalidating the warantee by opening the player.

3.1 Opening the player

Step 1 -
Remove the four side panel screws
Step 2 -
Remove the four rear panel screws
continued over...
Page 10