Quick Links



Table of Contents

Subscribe to Our Youtube Channel

Summary of Contents for Black & Decker GTC800

  • Page 1 GTC800 GTC800NM GTC800P...
  • Page 2 English (Original instructions)
  • Page 5: Intended Use

    Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker hedgetrimmer has been designed for protected supply. Use of an RCD reduces the risk of trimming hedges, shrubs and brambles. This tool is intended electric shock.
  • Page 6 e. Maintain power tools. Check for misalignment or Carry the hedge trimmer by the handle with the cutter binding of moving parts, breakage of parts and any blade stopped. When transporting or storing the other condition that may affect the power tools hedge trimmer always fit the cutting device cover.
  • Page 7: Residual Risks

    Warning symbols Safety of others The following warning symbols are found on the tool: This appliance is not intended for use by persons (including children) with reduced physical, sensory or Warning! To reduce the risk of injury, the user must mental capabilities, or lack of experience and knowledge, read the instruction manual.
  • Page 8 Fitting and removing the trimmer head (fig. C) Do not expose the charger to water. Do not open the charger. Do not probe the charger. Fitting the trimmer head Align the groove on the outside of the coupling end of the The following symbols are found on your charger: handle (3) with the tongue on the inside of the coupling end of the trimmer head (4).
  • Page 9: Cleaning, Maintenance And Storage

    Guidelines for trimming (UK & Ireland) Do not force. Be sure that the battery is fully seated in the charger. Trim hedges and shrubs with seasonal leaves (new leaves Plug in the charger. every year) in June and October. Trim evergreens in April and August. 3 hour charger Trim conifers and other fast growing shrubs every six The battery will be fully charged in approx.
  • Page 10: Troubleshooting

    Tool will not start. Battery not installed properly. Check the battery Technical data installation. GTC800 (H1)/GTC800P (H1) Battery discharged. Fit a (fully) charged battery. / GTC800NM (H1) Lock-off button not actuated. Observe the starting Voltage procedure.
  • Page 11: Ec Declaration Of Conformity

    This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member GTC800, GTC800P, GTC800NM States of the European Union and the European Free Trade Area.
  • Page 15 ENGLISH Do not forget to register your product! Register your product online at or send your name, surname and product code to Black & Decker in your country.
  • Page 16 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...

This manual is also suitable for:


Table of Contents