Outbound On Front Course For Procedure Turn To Loc Approach Using Hsi - Honeywell KAP 140 Pilot's Manual

Single Axis Operation

Outbound On Front Course For Procedure Turn To LOC Approach Using HSI

D.C. ELEC.
TURN COORDINATOR
L
2 MIN.
NO PITCH
INFORMATION
GS
ı
G
KAP 140
AP HDG NAV APR
1. The aircraft is heading 270° with heading
engaged. To intercept and fly the LOC front
course outbound, set the front course on the
HSI and depress the back course (REV) but-
ton. The back course (REV) mode is selected to
go outbound on the front course. The capture
point is now being computed based on closure
rate.
40
R
GS
REV
KAP 140 AUTOPILOT SYSTEM
D.C. ELEC.
TURN COORDINATOR
L
NO PITCH
INFORMATION
GS
ı
G
KAP 140
AP HDG NAV APR
2. When the computed capture point is reached,
HDG mode is cancelled and reverse localizer
mode is automatically activated and a left turn
outbound on the localizer is initiated by the
autopilot.
Note: The left-right deviations of the HSI course
needle operate just as though you were flying a
front course approach.
R
2 MIN.
GS
REV
Rev. 1
Apr/02