Honeywell KAP 140 Pilot's Manual page 18

Single Axis Operation
5. APPROACH (APR) MODE
SELECTOR BUTTON - When
pushed, will arm the Approach
mode. This mode provides auto-
matic beam capture and tracking of
VOR, GPS and LOC, as selected for
presentation on the HSI or CDI.
APR mode is recommended for
instrument approaches.
6. BACK COURSE APPROACH
(REV) MODE SELECTOR BUTTON
- When pushed, will arm the Back
Course approach mode. This mode
functions similarly to the approach
mode except that the autopilot
response to LOC signals is
reversed.
7. ROLL MODE DISPLAY -
Displays the active and armed roll
modes (ROL, HDG, NAV ARM,
NAV, APR ARM, APR, REV ARM,
REV). Also displayed will be flash-
ing AP annunciation (5 seconds) at
each autopilot disconnect accompa-
nied by an aural tone (for 2 sec-
onds).
8. AUTOPILOT ENGAGED (AP)
ANNUNCIATION - Illuminates
whenever the autopilot is engaged.
Flashes during pilot initiated or auto-
matic disengagement. Only applica-
ble for software versions 03/01 or
later.
Rev. 1
10
KAP 140 AUTOPILOT SYSTEM
Apr/02