Single Axis Operation
OPERATIONS WITH THE KAP 140
Takeoff And Climb To Assigned Altitude
1
D.C. ELEC.
TURN COORDINATOR
L
R
2 MIN.
NO PITCH
INFORMATION
OR
PUSH
G
KAP 140
AP
HDG
NAV
APR
1. The aircraft is well off the ground and estab-
lished at a desired climb rate.
The heading bug on the DG or HSI is turned to
the desired heading of 080° (runway heading).
By depressing the HDG button on the KAP 140,
the autopilot engages into the heading mode
and maintains the selected heading of 080°.
Note: Press and hold the AP button for 0.25
seconds to engage the autopilot (applicable
only to software version 03/01 and later).
32
2
GS
GS
ı
REV
KAP 140 AUTOPILOT SYSTEM
3
D.C. ELEC.
TURN COORDINATOR
L
R
2 MIN.
NO PITCH
INFORMATION
PUSH
G
KAP 140
AP
HDG
NAV
APR
2. The heading bug on the DG or HSI is turned to
the new desired heading of 010° and the aircraft
begins to respond with an immediate left turn.
4
GS
GS
OR
ı
REV
Rev. 1
Apr/02