Outbound On Front Course For Procedure Turn To Ils Approach Using Hsi - Honeywell KAP 140 Pilot's Manual

Two Axis Operation

Outbound On Front Course For Procedure Turn To ILS Approach Using HSI

D.C. ELEC.
TURN COORDINATOR
L
2 MIN.
NO PITCH
INFORMATION
GS
ı
G
KAP 140
AP HDG NAV APR
1. The aircraft is heading 270° with heading and
altitude hold engaged. To intercept and fly the
ILS front course outbound, set the front course
on the HSI and depress the back course (REV)
button. The back course (REV) mode is
selected to go outbound on the front course.
The capture point is now being computed
based on closure rate.
68
R
GS
UP
DN
REV
ALT
KAP 140 AUTOPILOT SYSTEM
D.C. ELEC.
TURN COORDINATOR
L
NO PITCH
INFORMATION
GS
ı
G
KAP 140
AP HDG NAV APR
2. When the computed capture point is reached,
HDG mode is cancelled and reverse localizer
mode is automatically activated and a left turn
outbound on the localizer is initiated by the
autopilot.
Note: The left-right deviations of the HSI course
needle operate just as though you were flying a
front course approach.
R
2 MIN.
GS
UP
DN
REV
ALT
Rev. 1
Apr/02