Panasonic FZ-M1 Operating Instructions Manual page 50

Troubleshooting (Basic)
Starting Up
Other startup prob-
lems.
50
Start the Setup Utility (
Utility") to return the Setup Utility settings (excluding the
passwords) to the default values. Start the Setup Utility and
make the settings again.
Remove all peripheral devices.
Check to see if there was a disk error.
A Remove all peripheral devices including an external
display.
B
1. Flick from the middle of the Start screen to the top,
and then long touch [This PC] under "Windows Sys-
tem".
1. Touch
C
Long touch [Windows (C:)], and touch [Properties].
Long touch [Local Disk (C:)], and touch [Properties].
D
Touch [Tools] - [Check].
Touch [Tools] - [Check Now...].
A standard user needs to enter an administrator pass-
word.
E Follow the on-screen instructions.
Start the computer in Safe Mode and check the error
details. When the [Panasonic] boot screen disappears
startup, press and hold
Options Menu is displayed. Select the Safe Mode and
Enter .
press
*1
When [Password on boot] is set to [Enabled] in the [Security]
menu of the Setup Utility, [Enter Password] appears after
the [Panasonic] boot screen disappears. As soon as you
enter the password and press
Reference Manual "Setup
(Start) - [Computer].
F8 until the Windows Advanced
Enter , press and hold F8 .
*1
at