5. Pull out the battery cable and the plastic tab (B) to remove the battery.
<Model with Smart card reader/Mag-
netic stripe card reader/NFC reader/
RFID reader>
6. <Only for model with Smart card reader/Magnetic stripe card reader/NFC
reader/RFID reader>
Pull out the plastic tab (C) to remove the circuit from the battery.
7. Insulate the connectors on the built-in battery by covering them with plastic
tape, for example.
<Model without Smart card reader/
Magnetic stripe card reader/NFC
reader/RFID reader>
B
B
C
39