Battery Recalibration; Sensors - Panasonic FZ-M1 Operating Instructions Manual

 Preventing your computer from unauthorized use via wireless LAN/Blue-
tooth/Wireless WAN
<Only for model with wireless LAN/Bluetooth/Wireless WAN>
 Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate se-
curity settings such as data encryption.
 Battery Recalibration
 The battery recalibration may take a long time due to the large battery capac-
ity. This is not a malfunction.
 <When performing "Battery Recalibration" after shutting down Windows>
 Full charge: Approximately 2.5 hours (with FZ-VZSU94W) / Approximately
4.5 hours (with FZ-VZSU95W (optional))
 Complete discharge: Approximately 3.5 hours (with FZ-VZSU94W) / Approxi-
mately 7.5 hours (with FZ-VZSU95W (optional))
 When performing "Battery Recalibration" without shutting down Windows, it may
take more time to charge / discharge.
  Sensors
This computer is equipped with four sensors (acceleration sensor, gyro sensor,
magnetic sensor, ambient light sensor), and you can use these sensors with any
software that is compatible.
As the accuracy of each sensor output is dependent on the operating environment
and other conditions, the results should only be used as a reference.
The acceleration sensor, gyro sensor, and magnetic sensor are located at the bot-
tom left of the LCD. The detection results of each sensor may vary depending on
the display mode, how you are holding the computer, the application software you
are using, and other factors.
35