Create The Recovery Disc; Pc Information Viewer; Before Using Wireless Function; To Change The Partition Structure - Panasonic FZ-M1 Operating Instructions Manual

NOTE

PC Information Viewer

This computer periodically records the management information of the fl ash
memory, etc. The maximum data volume for each record is 1024 bytes.
This information is only used for estimating the cause when the fl ash memory
goes down by any possibility. They are never sent to outside via network nor
used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save
function for management information history] in [Hard Disk Status] of PC Infor-
mation Viewer, and touch [OK]. Then follow the on-screen instructions.
( Reference Manual "Checking the Computer's Usage Status")

Before using wireless function

A Display "Charm", and touch
mode].
Set [Airplane mode] to [Off], and then;
set [Wi-Fi] to [On] (for wireless LAN).
set [Mobile broadband] to [On] (for wireless WAN).
set [GPS] to [On] (for wireless WAN).
set [Bluetooth] to [On] (for Bluetooth).

To change the partition structure

You can shrink a part of an existing partition to create unallocated disk space,
from which you can create a new partition. In the default setting, you can use a
single partition.
A
1. Touch
dows System".
2. Touch [Manage] on app bar.
Touch (Start) and long touch [Computer], then touch [Manage].
A standard user needs to enter an administrator password.
B Touch [Disk Management].
5

Create the recovery disc.

A recovery disc allows you to install OS and restore
its factory default condition, in case, for example, the
recovery partition of the fl ash memory is damaged.
We recommend creating a recovery disc before you
begin using the computer.
Refer to
Creation Utility" about creating the disc.
on the Start screen, and then long touch [This PC] under "Win-
Reference Manual "Recovery Disc
- [Change PC Settings] - [Network] - [Airplane
29