Panasonic FZ-M1 Operating Instructions Manual page 28

First-time Operation
28
Setup of Windows will take approximately
Go to the next step, confi rming each message on
the display.
A When "Enable sensors" is displayed, touch [En-
able this sensor].
B When the [User Account Control] screen is dis-
played, touch [Yes].
C At the [Display Rotation Tool] confi rmation
screen, touch [Yes].
The computer restarts automatically, and the set-
ting is enabled.
You can set the Wireless Network after the setup of
Windows is complete.
select "Skip this step".
not appear.
CAUTION
You can change the user name, password, image and
security setting after setup of Windows.
Remember your password. If you forget the password,
you cannot use Windows. Creating a password reset
disk beforehand is recommended.
Do not use the following words for user name: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to
LPT9, @, &, space. In particular, if you create a user
name (account name) that includes the "@" mark, a
password will be requested at the log-on screen, even
if no password has been set. If you try to log on with-
out entering a password, "The user name or password
is incorrect." may be displayed and you will not be
able to
Windows ( page 51).
5 minutes /
Follow the steps below.
If "Get online" is displayed, you can
"Join a wireless network" screen may
sign in /
20 minutes.
log on to