Panasonic FZ-M1 Operating Instructions Manual page 49

Starting Up
[Enter Password]
does not appear
when resuming
from sleep/hiberna-
tion.
Cannot resume.
Select [Enabled] in [Password On Resume] in the [Security]
menu of the Setup Utility (
Utility").
The Windows password can be used instead of the pass-
word set in the Setup Utility.
A Add a password.
1. Display "Charm" and touch
- [Accounts].
2. Touch [Sign-in options], and touch [Add] under "Pass-
word".
1. Touch (Start) - [Control Panel].
2. Touch [User Accounts and Family Safety] - [Add or
remove user accounts].
B Set up the following.
1. Open the Control Panel, touch [System and Security]
- [Power Options] - [Require a password on wakeup].
2. Add a check mark for [Require a password].
1. Touch [Control Panel] - [System and Security] - [Power
Option] - [Require a password when the computer
wakes] and add a check mark for [Require a pass-
word].
One of the following operations may have been carried out.
Press the power switch to turn on the computer. Data not
saved will be lost.
In sleep mode, the AC adaptor or battery pack was
disconnected, or a peripheral was connected or discon-
nected.
The power switch was pressed for four seconds or longer
to forcibly turn off the computer.
An error may occur when the computer automatically en-
ters the sleep or hibernation mode while the screensaver is
active. In this case, turn off the screensaver or change the
pattern of the screensaver.
Reference Manual "Setup
- [Change PC settings]
49