Table of Contents
Advertisement
The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN,
USB Ports and CPU/System FAN.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Fan Power Connectors: CPUFAN2/SYSFAN1/PWRFAN1
The CPUFAN2 (processor fan), SYSFAN1 (system fan 1), and PWRFAN1
(power fan) support system cooling fan with +12V. It supports four/three-pin head
connector. When connecting the wire to the connectors, always take note that the
red wire is the positive and should be connected to the +12V, the black wire is
Ground and should be connected to GND. If the mainboard has a System Hardware
Monitor chipset on-board, you must use a specially designed fan with speed sensor
to take advantage of the CPU fan control.
GND
+12V
Sensor
Control
CPUFAN2
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CPUFAN2 supports the fan control.
3. Please refer to the recommended CPU fans at Intel
website.
Connectors
FDD1
GND
+12V
NC
PWRFAN1
SYSFAN1
Hardware Setup
GND
+12V
NC
®
official
2-13
Hide quick links:
Advertisement
Table of Contents
