MSI MS-7058 User Manual page 25

MS-7058 ATX Mainboard
Hard Disk Connectors: IDE1
The mainboard has one 32-bit Ultra DMA 66/100 IDE controller integrated in
ICH6, which supports PIO & Bus Master operation modes and it can connect up to
two Ultra ATA drives.
IDE1 (Primary IDE Connector)
The first hard drive should always be connected to IDE1. IDE1 can connect a Master
and a Slave drive. You must configure second hard drive to Slave mode by setting the
jumper accordingly.
MSI Reminds You...
If you install two hard disks on cable, you must configure the second
drive to Slave mode by setting its jumper. Refer to the hard disk
documentation supplied by hard disk vendors for jumper setting
instructions.
2-14
IDE1