Connecting The Pipe; Flare Adaptor For Piping - Hitachi RAM-90QH5 Service Manual

MODEL: RAM-90QH5
700
One unit of 1.8kW, 2.5kW, 3.5kW, 5.0kW or 6.0kW
(5.0kW, 6.0kW unit: Optional flare adaptor for piping is necessary.)
One unit of 1.8kW, 2.5kW, 3.5kW, 5.0kW or 6.0kW
(5.0kW, 6.0kW unit: Optional flare adaptor for piping is necessary.)
One unit of 1.8kW, 2.5kW, 3.5kW, 5.0kW or 6.0kW
(5.0kW, 6.0kW unit: Optional flare adaptor for piping is necessary.)
One unit of 1.8kW, 2.5kW, 3.5kW, 5.0kW, 6.0kW or 7.1kW
(1.8-3.5kW unit: Optional flare adaptor for piping is necessary.)
One unit of 1.8kW, 2.5kW, 3.5kW, 5.0kW, 6.0kW or 7.1kW
(1.8-3.5kW unit: Optional flare adaptor for piping is necessary.)
Face this side (suction
side) of the unit to the wall.
Remove side cover when
connecting the piping and
connecting cord.
Pull downward
– 17 –

Flare adaptor for piping

The flare adaptor for piping is
required depending on combination
of indoor units.
• ø9.52 (3/8") ➝ ø 12.7 (1/2")
Parts number TA261D-4 001
• ø12.7(1/2") ➝ ø 9.52 (3/8")
Parts number TA261D-6 002
• ø12.7(1/2") ➝ ø 15.88(5/8")
Parts number TA261D-6 003
Dimension of Mounting Stand
of the Outdoor unit
(unit: mm)
%
!
$
%#