Paper Width - Toshiba e-studio287CS User Manual

4
Adjust the manual guides to fit the

paper width.

Manual Guide
5
Press down the back of the bypass
tray.
6
With the side you want to print on
facing up, insert the edge of the
paper into the back of the bypass
tray.
Note
•
Loaded paper should not exceed the [ i] mark on the
manual guide. You can load up to 100 pages at 82g/
m .
2
7
Push the blue set button.
Note
•
Do not mix papers of different size, type, or
thickness.
•
When adding paper to the bypass tray, take out any
paper already inserted, then add the extra paper and
realign the paper into a tidy stack.
•
Curled or warped postcards or envelopes may cause
misfeeds. Try to use material that is not curled. Any
curl of 2 mm or more should be corrected.
•
Do not place any material on the bypass tray other
than paper for printing. Do not use excessive force
when raising or pushing the bypass tray.
Manual Guide
Bypass Tray
Set Button
(Blue)
- 65 -
8
Press [BYPASS FEED] on the touch
panel.
9
Press [ZOOM] on the touch panel.
10
Select the same size button under
"COPY" as that of the paper you
placed on the bypass tray.
The paper size is now set.
Note
•
If the paper size is not selected in this step, copying
may be slowed down.
How to Load the Paper
1
2
3
4
5
6