Removing The Wireless Lan Module - Clevo M540J Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 10
Wireless LAN
1. Turn off the computer, remove the battery
Module Removal
2. Carefully disconnect cable
3. The Wireless LAN Module
a. Disconnect the cable
and pull the release
latches.
b. The WLAN module will
pop up.
c. Remove the wireless
LAN module.
Note: Make sure you re-
connect the antenna ca-
ble to the "Main" socket
(Figure 10a).
4. Wireless LAN
Module.
2 - 14 Removing the Wireless LAN Module
, then gently pull the two release latches (
1
(Figure 10b) will pop-up, and you can remove it.
4
a.
1
2
3
.
(page 2 - 5) and the bay cover
-
2
b.
c.
4
) on the sides of the module socket.
3
4