Ignition Spark Gap - Yamaha WaveRunner FX140 Service Manual

Hide thumbs Also See for WaveRunner FX140:
Table of Contents

Advertisement

+
ELEC
È
É
È
É
IGNITION SYSTEM

IGNITION SPARK GAP

WARNING
• When checking the spark gap, do not
touch any of the connections of the spark
gap tester lead wires.
• When performing the spark gap test, take
special care not to let sparks leak out of
the removed spark plug cap.
• When performing the spark gap check,
keep flammable gas or liquids away,
since this test can produce sparks.
1. Check:
• Ignition spark gap
Below specification → Check the ECM
output peak voltage.
Check the ignition coil for resistance.
Spark gap:
7–8 mm (0.28–0.31 in)
Checking steps:
• Connect the spark plug cap to the spark
gap tester.
• Set the spark gap length on the adjusting
knob.
Spark gap tester:
YM-34487/90890-06754
• Crank the engine and observe the igni-
tion system spark through the discharge
window.
È For USA and Canada
É For worldwide
7-16
E

Advertisement

Table of Contents
loading

Table of Contents