Setting Copy Paper (Size Change) - Toshiba E-studio 352 Operator's Manual

4.Setting Copy Paper (Cont.)

Setting copy paper (size change)

When you set or add copy paper in the drawer, follow the procedure below.
1
Placing paper in the drawer
1
Turn the power on.
2
Pull out the drawer carefully until it
comes to a stop.
3
Push the lower part of the end guide in
the direction of the arrow to remove it,
then reinstall it at the desired paper size
(indicated on the bottom inner surface on
the drawer).
4
Push the arrow part (right side) of the
side guide to unlock it.
50
1.BEFORE USING EQUIPMENT