Setting Copy Paper (Size Change) - Toshiba e-Studio 2500c Operator's Manual

1 BEFORE USING EQUIPMENT

Setting copy paper (size change)

When you set or add copy paper in the drawer, follow the procedure below.
Placing paper in the drawer
1
Turn the power on.
2
Pull out the drawer carefully
until it comes to a stop.
3
Push the lower part of the end
guide in the direction of the
arrow to remove it, then rein-
stall it at the desired paper size
(indicated on the bottom inner
surface on the drawer).
4
Push the arrow part (right side)
of the side guide to unlock it.
54 Preparation 2- Setting Copy Paper