Toshiba E-studio 352 Operator's Manual page 161

8
After the specifying of all insertion pages is finished, press the
[ENTER] button.
9
Press the [BASIC] button to enter the basic menu, and then select a
paper source of the same size and direction as the sheet insertion.
• Select other copy modes as required.
10
Press the [START] button.
• When the Reversing Automatic Document Feeder (optional) is used, the original is scanned and copying
starts.
• When the original is placed on the original glass, perform steps 11 and 12.
11
Place the next original, and press the [START] button.
• Data scanning of this original starts.
• The next original will also be scanned in the same manner when you press the [YES] button on the touch
panel, and then press the [START] button on the control panel.
• Repeat this step until all the originals have finished being scanned.
12
After all the originals have finished being scanned, press the
[FINISHED] button.
• Copying starts.
5
159