Toshiba E-studio 352 Operator's Manual page 29

Scrambler Board (GP-1040)
This board enhances the security of the equipment. Data are encrypted when they are written into the hard
disk of the equipment, and decrypted when they are read.
• Installed inside of the equipment
• The PCI Slot (GO-1060) is necessary.
Wireless LAN Module (GN-1041)
This module enables the equipment to be used in a wireless LAN environment.
• Installed inside of the equipment
• The Antenna (GN-3010) is necessary.
• The equipment cannot be connected to the wireless and wired LAN at the same time.
Bluetooth Module (GN-2010)
This module enables the Bluetooth printing.
• Installed inside of the equipment
• The Antenna (GN-3010) is necessary.
Antenna (GN-3010)
This is used when the Wireless LAN module and Bluetooth Module are installed.
Printer Kit (GM-1060)
This kit enables the printing function.
• This kit is for the e-STUDIO352/452. Use the GM-1061 for the e-STUDIO353/453.
• Printing using a printer driver supporting XPS is not available.
Printer Kit (GM-1061)
This kit enables the printing function.
• Printing using a printer driver supporting XPS can be performed if the Memory (GC-1230) is installed in
the equipment.
Printer/Scanner Kit (GM-2060)
This kit enables the printing and scanning functions.
• This kit is for the e-STUDIO352/452. Use the GM-2061 for the e-STUDIO353/453.
• Printing using a printer driver supporting XPS is not available.
Printer/Scanner Kit (GM-2061)
This kit enables the printing and scanning functions.
• Printing using a printer driver supporting XPS can be performed if the Memory (GC-1230) is installed in
the equipment.
Scanner Kit (GM-4060)
This kit enables the scanning function.
Memory (GC-1230)
Printing using a printer driver supporting XPS can be performed if this memory is installed together with
the Printer Kit (GM-1061) or Printer/Scanner Kit (GM-2061).
e-BRIDGE ID Gate (KP-2004, KP-2005)
Users can login and use the equipment simply by holding their IC card over the e-BRIDGE ID Gate.
• This cannot be installed with the Work Table at the same time.
1
27